Faber STILO, Instruction Manual

Page: 9 / 24

EN
9
9
USE
A B C D E F G H
Control board
Key Function Display
A Switches the motor on and off at the latest selected
speed.
In case the remote motor is connected, by pressing
this key, its motor can be switched on or off. Indicates the selected speed.
B Decreases the suction speed.
When the motor and the lighting are off, by pressing
this key for 3 seconds, the control board can be
locked or unlocked.
Lo appears.
C Increases the suction speed.
D By pressing this key it is possible to activate the in-
tensive speed from any previously selected speed.
The intensive speed can be activated even when the
motor is OFF. This speed has been timed at 5 min-
utes. After that time the system activates automati-
cally the latest selected speed. This function is suit-
able for cooking conditions when vapours and smells
are of the utmost emission. HI appears. The spot down on the right side
flashes once a second.
E By pressing this key it is possible to set up the motor
to a suction speed at 140 m
3
/h lasting 10 minutes
every hour for 24 hours.
When the filter saturation is going on it is possible to
reset the alarm by pressing this key for about 3 sec-
onds. The indication is visible only when the motor
is off.
Indicates the 24-function. The spot down on the
right side flashes and the motor is on.
Once the process is finished the previous indi-
cation disappears:
FF Indicates that the metal grease filters satu-
ration alarm has been triggered, and the filters
need to be washed. The alarm is triggered after
100 working hours.
EF Indicates that the charcoal filter saturation
alarm has been triggered, and the filter has to be
replaced; the metal grease filters must also be
washed. The charcoal filter is triggered after 200
working hours
F By pressing this key it is possible to set the delayed
shutdown of the appliance to 10 minutes. This func-
tion is suitable for a complete elimination of the re-
sidual smells. It can be activated at any position, and
it is deactivated by pressing the key again or by
switching off the motor. Indicates alternately the selected speed of the
hood and the time left before the hood shut-
down. The spot down on the right side flashes.
G Turns light on and off.
H Turns light on and off at reduced intensity.
The motor and the lighting will remain on for maximum 5 hours except when the 24h
-function is activated.