PROCEDURE C
• Press the “
24H
”-key for about 5 seconds until the icons of activated functions will be lit.
• When releasing the key, the -symbol starts to flash, within
3 seconds
press again the
“
24H
”-key and the follow-
ing will appear on the display:
-
the points under the motor LEDS
are lit, the receiver of the remote control is
ACTIVATED
;
-
the points under the motor LEDS are unlit, the receiver of the remote control is
DISCONNECTED
.
PROCEDURE D
• Switch off the light and the motor.
• Press for about
5 seconds
the -key until you will see:
- “ + “
twice
, to indicate the
ACTIVATION
of the remote control receiver;
- “ + “
once
, to indicate the
DISCONNECTION
of the remote control receiver;
PROCEDURE E
• Switch off the motor and the lighting system.
• Unplug the hood from the mains supply.
• Re-establish the net connection by pressing the button
.
• Keep on pressing the button
, and on the basis of software's version two situations might appear:
A
) On the display you can see "
SE
", then, please immediately release the button , within
3 seconds
on the dis-
play you can see a sequence, at this point please press the button "
24H
", you will see :
-
"
TC
"
twice
, to indicate the
ACTIVATION
of the remote control receiver;
-
"
TC
"
once
, to indicate the
DISCONNECTION
of the remote control receiver.
B
) After few seconds nothing will appear on the display, please release the button
, within
3 seconds
on the dis-
play you can see a sequence, at this point please press the button "
24H
", you will see:
-
"
TC
"
twice
, to indicate the
ACTIVATION
of the remote control receiver;
-
"
TC
"
once
, to indicate the
DISCONNECTION
of the remote control receiver.
PROCEDURA F
• Switch off the light and the motor.
• Press the “
V2
”-key for about 5 seconds until:
• the
Led
V4
flash twice to indicate the
ACTIVATION
of the remote control receiver;
• the
Led
V4
flash once to indicate the
ACTIVATION
of the remote control receiver;
Warning!!!
The pictures shown are generic, your product may have symbolic and / or different aesthetic, follow the steps indi-
cated until you turn the receiver ensuring the operation of the Remote Control.
Summary of Contents for REMCTRL
Page 20: ...RU 1 5 LR03 AAA Delay...
Page 22: ...24H 5 3 24H D 5 2 1 A SE 3 24H TC 2 TC 1 B 3 24H TC 2 TC 1 F V2 5 V4 2 V4 1...
Page 23: ......
