DO NOT USE THINNER, ALCHOHOL OR PETROL
You may clean the heater with a damp cloth and mild detergent but do not use thinner, alcohol,
petrol or any other organic solution.
CLEAN FILTER REGULARLY (DIAGRAM 6)
a)
Remove the filter mesh from the stop valve (for filter type only) by turning the knob filter
counter clockwise and pulling out the knob (Diagram 6). Flush it with water to remove any
trapped sediments. Install the knob filter back to its original position.
7
1.
Switch on the main power supply, the ‘POWER’ LED would light up
.
2.
Turn on the water supply at the stop valve.
3.
Turn on the Temperature Control Knob. The ‘HEATER’ LED would light up and the water
temperature will be increased accordingly as the knob is turned clockwise from ‘ON’ to ‘MAX’.
4.
For normal cold shower, just turn the Temperature Control Knob to ‘OFF’ position.
5.
Switch off the power supply when not in use.
4. OPERATION PROCEDURES
5. GENERAL MAINTENANCE
CLEAN FILTER
MESH REGULARLY
Filter Mesh
stop valve