Faber MAESTRALE MAES3018SS600-B Installation Instructions; Use And Care Information Download Page 17

17

USE  AND  CARE  INFORMATION

,

LED indicator light (I) - indicates current speed with color

Green    

- speed 1

Orange   

- speed 2

Red  

 

- speed 3

Flashing Red  

- intensive speed

Light On/Off Button ( L )

On/Off switch for the halogen lights. Press the button to turn the light ON and press again 

to turn it OFF.

Blower On/Off Button ( T1 )

On/Off button for the blower. Press the button to turn the blower ON to speed one (indi-

cated by green LED) and press again to turn the hood off

Blower Speed 2 (T2)

Press this button to turn the hood onto speed #2. (indicated by orange LED)

Blower Speed 3 / Intensive (T3)

Press this button to turn the hood onto speed #3. (indicated by solid red LED) Hold down 

the speed 3 button for 2 seconds to activate the intensive speed. The intensive speed set-

ting is indicated by a blinking red light. This operates the hood for 6 minutes on the highest 

speed and then returns to the previous speed.

For Best Results

Start the rangehood several minutes before cooking to develop proper airflow. Allow the 

unit to operate for several minutes after cooking is complete to clear all smoke and odors 

from the kitchen.

Summary of Contents for MAESTRALE MAES3018SS600-B









































Reviews: