Faber Levante 2 Plus, Installation Instructions Manual

Page: 17 / 64

17
Installation of wiring connection
5HPRYHWKHFRYHUIURPWKH¿HOGZLULQJFRPSDUWPHQW
5HPRYHWKHZLULQJHOHFWULFDONQRFNRXWXVLQJDÀDW
blade screwdriver. Feed the Power Supply Cable
through the electrical knockout.
Connect the Power Supply Cable to the rangehood.
Attach the White lead of the power supply (
A ) to the
White lead of the rangehood ( D ) with a twist-on type
wire connector. Attach the Black lead of the power
supply to the Black lead of the rangehood (
B ) with
a twist-on type wire connector ( C ). Connect the
Green ( E ) (Green and Yellow) ground wire under
the Green grounding screw.
5HSODFH WKH ¿HOG ZLULQJ FRPSDUWPHQW FRYHU DQG
WKHJUHDVH¿OWHUV
Hood wiring
USE AND CARE INFORMATION
T1. Hood ON/OFF button. The hood can be turned on by pressing any of the fan settings.
T2. Fan Settings Buttons: Low Speed.
T3. Fan Settings Buttons: Medium Speed.
T4. Fan Settings Buttons: High Speed.
Hold down the button for 2 seconds to activate the INTENSIVE SPEED, which is timed to run for 10 minutes. At the end of
this time it will automatically return to the speed set before.Suitable to deal with maximum levels of cooking fumes.
L. Light Button: On/Off switch for the Led lights.
L T1 T2 T3 T4
For Best Results
6WDUWWKHUDQJHKRRGVHYHUDOPLQXWHVEHIRUHFRRNLQJWRGHYHORSSURSHUDLUÀRZ$OORZWKHUDQJHKRRGWRRSHU
-
ate for several minutes after cooking is complete to clear all smoke and odors from the kitchen.