Faber GALILEO BK A830 User Manual Download Page 5

5

• WARNING:

 If the surface is 

)%*2-
ance to avoid the possibility 
of electric shock.

• Do not switch on a device if the 

surface is cracked or there is a 
damage to the material thickness.

• Do not touch the appliance 

with wet parts of the body.

• To clean the product a steam 

cleaner is not to be used.

•  Metallic objects such as knives, 

forks, spoons and lids should 
not be placed on the hob sur-
face since they can get hot.

• 6 % * 2  

element by its control and do 
not rely on the pan detector.

• WARNING:

 Unattended cook-

ing on a hob with fat or oil 
can be dangerous and may 
   79;9<   
   * *%
 * 2  
"*
     )

• CAUTION:

 The cooking pro-

cess has to be supervised. A 
short term cooking process has 
to be supervised continuously.

• The appliance is not intended 

to be operated by means of 

remote-control system.

• WARNING:

 #  =

do not store items on the 
cooking surfaces.

• Ensure that the device is in-

stalled in a way that allows 
to disconnect it from the power 
supply, with a contact opening 

distance (3 mm) that ensures 
complete disconnection in cate-
gory III overvoltage conditions. 

• Ensure that the device is 

   
agents (rain, sun).

•  Ensure that the ventilation of the 

appliance is in accordance with 
the manufacturer‘s instructions.

2. USE

• !   

  " 
for domestic use to eliminate 
kitchen smells.

• Never use the appliance for 

purposes other than for which 
it has been designed.

• Deep fat fryers must be con-

tinuously monitored during use: 
overheated oil can burst.

• Do not operate the appliance 

**
separate remote control system.

• The appliance shall not be in-

stalled behind a decorative door 
in order to avoid overheating.

• To avoid damaging the appli-

ance, do not climb onto the 
appliance.

• To avoid damaging the silicon 

grouting, do not put hot cook-
ware on the frame.

• Do not cut or prepare food 

on the surface or drop hard 
objects onto it. Do not drag 
cookware across the surface.

Summary of Contents for GALILEO BK A830















Reviews: