background image

23

24

Cleaning and maintenance

Refrigerator's maintenance and repair

Cleaning

Clean regularly dust from the back of refrigerator and ground.

Clean regularly the space inside the refrigerator to avoid any unpleasant smell.

Before cleaning, pull out the plug and use soft towels and neutral detergent and 
clean it finally with clear water. It is recommended to clean once half a year.

Never use following substances to clean the space inside the refrigerator:

Alkaline or weakly alkaline detergent (it might cause cracking of the liner and 
plastic parts).

Soap powder, benzoline, thinner, alcohol and etc (might damage plastic parts).

Wipe  edible oil or flavoring immediately (might cause cracking of plastic parts)

Lights and replacement

Replace by professionals.

Refrigerator compartment keep fresh with optical wave (only some models)

Keep fresh with optical wave--- use the optical-wave lamp to maintain the 
Photosynthesis of fruit and vegetables, prolong the growth period and keep it 
fresh effectively.

Shutdown

When the refrigerator isn't used for a long period:

Pull out the power cable to avoid that the power cable gets old and causes 
electric shock or fire.

Clean the space inside the refrigerator

Open the door for a period for drying, close the door with a gap left to avoid 
unpleasant odor.

Power outage

Reduce the times of door opening during power outage, don't put fresh food 
inside the refrigerator anymore.

Disposal

When you discard an unused refrigerator, remove the door seal to avoid locking 
children inside the refrigerator.

Danger

Risk of child entrapment. Before you throw away your old refrigerator or freezer:

1. Take  the doors.

2. Leave the shelves in place so that children may not easily climb inside.

Please read the following contents before repair request:

If the situation doesn't turn better after you have checked all above items, please 
contact with the after-sales Service Centers. If power cables are damaged, please 
get it changed by the repairmen designated by our Service Centers to avoid any 
risk.

Normal phenomena not regarded as malfunctioning

Refrigerant inside the capillary tubes of the refrigerator flow in high speed and 
might have a few amount of bubbles. Hence, irregular noises might appear at the 
outlet.

When the air humidity is excessively high, moisture or water droplets might appear 
around the refrigerator's door. You just need to wipe it .

No extension cord used

Whether the power is switched on, whether 
the plug is secured?
Whether the voltage is too low?

Whether the temperature is set too high
(might reduce the temperature as required). ?
Whether too much food is stored?
Whether hot foot is stored?
Whether the door is opened and closed too 
frequently?
Whether there is hot source around the 
refrigerator?
Whether the door seal is closed?

Whether  the  ground  is  leveled  and  the 
refrigerator is placed on leveled ground?
Whether accessories of the refrigerator are 
put at the right position?

Whether the food is put near the air outlet?

Not working

Can't freeze properly

Loud noises

Food  is  frozen  inside  the 
refrigerator compartment.

The refrigerator has unpleasant 

smell

Ocurrence

Possible cause / inspection itens

Solutions to problems

Food  with  special  odor  shall  be  tightly 
wrapped.
Check whether the food has gone bad.
Clean inside the refrigerator.

Summary of Contents for FRIGOR 719
















Reviews: