Faber e-MatriX 1050/400 I, Installation Manual

Page: 39 / 116

Installation manual e-MatriX 1050-1300/400 I, II, III Linear
38 < < < <
Dear user
Congratulations on your purchase of a Faber fire! A
quality product from which you will experience
warmth and atmosphere for many years. We rec-
ommend that you read this manual carefully be-
fore using the fireplace. If any problem arises de-
spite our strict quality control, you can always con-
tact your dealer or Glen Dimplex Benelux B.V.
For any warranty claims, it is essential you first
register your fireplace. During this registration,
you’ll find all information regarding our warranty.
➢
Please note!
The details of your fireplace can be found in
the user manual.
You can register your fire at:
www.faberfires.com
Glen Dimplex Benelux B.V.
Address: Saturnus 8
NL-8448 CC
Heerenveen
Tel: +31 (0)513 656 500
Email: contact@faberfires.com
Info:
www.faberfires.com
1.1 Introduction
Only have the fire installed by a qualified installer
according to the water and electric safety
Regulations. Read this installation manual properly.
Where the installation instructions are not clear,
national/local regulations must be followed.
1.2 Check
•
Check the fire for transport damage and
report any damage immediately to your
supplier.
•
Check whether all of the parts below are
included:
o
Control box
o
Remote (incl. batteries)
o
Ash material
o
Suction cups (2x)
o
Remote access door
o
Spare transducers (2x) and
sponge
1.3 CE declaration
We hereby declare that Glen Dimplex Benelux B.V.
released Faber heating appliance by its design and
construction method complies with the European
Safety Standards EN60335-2-30 and the European
Standard Electromagnetic Compatibility (EMC)
EN55014, EN60555-2 and EN60555-3 these cover
the essential requirements of EEC Directives
2014/35/EU and 2014/30/EU.
Product: electric fire Opti-myst
Model: e-MatriX Linear 1050/400 I,II,III
e-MatriX Linear 1300/400 I,II,III
This declaration will become null and void as soon
as the unit is in any way modified without written
authorization of Glen Dimplex Benelux B.V.
Safety instructions
•
Do not use outdoors.
•
Do not use in the immediate surroundings
of a bath, shower or swimming pool.
•
The fire must be installed according this
manual.
Installation requirements
3.1 Water supply
•
Install a water connection with an ½” or
¾” external thread connection, placed at
an accessible location.
•
Install an EA backflow protection valve,
this is not included with the appliance.
•
Water pressure on the appliance between
0,5 and 8 Bar. Where required, use a pres-
sure reducing valve.
3.2 Power supply
Electric connection -230VAC/50Hz earthed and
placed at an accessible location.
Preparation and installation instruc-
tions
4.1 Preparing the fire
•
Make sure that all packaging materials
have been removed.
•
Remove the packaged parts.
•
Remove the front glass, see chapter 5.
4.2 Placing the fire
➢
Please note!
•
Always the fire must be fitted with the
back to a wall.
•
The fitting of a chimney breast is manda-
tory.
•
For a proper functioning of the fire, al-
ways ensure that the fire is levelled.
Floor standing
Place the fire in the correct position and fix it to
the wall, see fig. 1.1.