Faber DAMA ISOLA Series, Installation Instructions; Use And Care Information

Page: 18 / 60

18
Cleaning metal grease filters
The filters must be cleaned every 2 months of operation,
or more frequently for particularly heavy usage, and can
be washed in a dishwasher.
• Remove the filters one at a time by supporting them with
one hand and turning the safety knobs (pull and turn).
• Wash the Filters without bending them, and leave them
to dry completely before replacing. (If the surface of
the filter changes color as time goes by, this will have
absolutely no effect on the efficiency of the filter itself.)
• Refit them and fix them using the safety knobs pro-vided
(pull and turn).
• No water can be present in filters before installing back
in hood.
Replacing Activated Charcoal Filter
The filter is not washable and cannot be regenerated,
and must be replaced approximately every 4 months of
operation, or more frequently for particularly heavy usage.
• Remove the Filters one at a time, pushing them to-
wards the back of the unit and at the same time pulling
downward.
• Remove the saturated charcoal filter by releasing the
fixing hooks.
• Fit the new filter and fasten it in its correct position.
• Replace, taking care to ensure that the handle faces
forwards.
Caution : "When used in recirculation mode, to
Reduce the Risk of Fire and Shock use only conver -
sion kit Model FILTER2".
Gu10 self-ballasted led lamps
– listed in accordance with ul
1993/nmx-j-578/1-ance/csa
c22.2 No. 1993
Lighting unit
• Remove the snap-on lamp cover by levering it from
under the metal ring, supporting it with one hand.
• Replace the lamp with a new one of the same type,
making sure that you insert the two pins properly into
the housings on the lamp holder.
• Replace the snap-on lamp cover.