Faber Blokhus 40011609-1545, Installation Instructions Manual

Page: 19 / 24

1 9
I n s t a l l a t i o n I n s t r u c t i o n s
19 Instructions
19.1 Requirements
• The distance to the ceiling must be at least 250mm.
• When a single module is used in combination with double
module(s), the single must be installed on top.
• The back panel of the double module has cut outs which can
be removed in case of a wall terminal or back outlet. (see
dimensional drawings)
• The fire can be fitted to the wall by using the included wall
bracket. (Photo 3)
19.2 Montage
Fire:
• Remove the top plate and the rear inlay part. Replace these
back on the top module after installation.
Extension module(s):
Preparation:
• Remove the module(s) from its packaging.
• Loosen screws A on the inside (Photo 1) to remove the
panels.
• If necessary the back panel(s) can be removed by loosening
scews B (Photo 1).
• Remove the upper panel of the fire by loosening screws A.
Montage:
• Place and screw the first extension module on the fire with
the included screws and nuts. (Photo 2)
• Install the first flue part on the fire.
• If necessary fit the back panel with the screws B.
• Place the panels back and eventually lock these with the
screws A.
• The other modules can be fitted in the same way.
• If necessary the complete fire can be fitted to the wall with
the wall bracket. (Photo 3)
The screws for fixing on the fire are included, the screws for
fixing on the wall not. (Is depending
of the wall structure).
B
B
A
A
1
2
3