5.Maintenance
1. Barrel Cleaning
*After working or when the barrel is full of dust which cause suction
decreases considerably, you should cut off the electricity and clean the dust
away from the barrel.
1) Unfasten the locking knob, lift up the top cover.
2) Take off the HEPA filter, clean the dust away in the dust barrel.
3) Install the HEPA filter back and place the top cover.
2.HEPA filter cleaning.
*The filter could be washed by clean and warm water when it was covered
with dust, if necessary. you can use litmus less scour to wash.
*The filter could also be cleaned by spraying compressed air.
6. Tech-data
Model
Power
Voltage
Frequency
Barrel
Blizzard
FVC-WD 650
1200W
AC240V
50/60Hz
50L
1) Take off the filter
2) Wash
3) Dry
