Faber A9327900, User Manual

Page: 15 / 32

User manual e-MatriX wall control panel ENG
15 < < < <
Dear user
Congratulations on your purchase of a Faber fire! A
quality product from which you will experience
warmth and atmosphere for many years. We
recommend that you read this manual carefully
before using the fireplace. If any problem arises
despite our strict quality control, you can always
contact your dealer or Glen Dimplex Benelux B.V.
For any warranty claims, it is essential you first
register your fireplace.
➢
Please note!
The details of your electric fire can be found
on page 3 of this user manual.
You can register your fireplace at:
www.faberfires.com
Glen Dimplex Benelux B.V.
Address:
Saturnus 8
NL-8448 CC
Heerenveen
Tel: +31 (0)513 656 500
Email: contact@faberfires.com
Info: www.faberfires.com
Check
Check the fire for transport damage and
immediately report any damage to your supplier.
Introduction
Basic functions can be activated with the remote
control.
For extensive settings such as Mood settings and
thermostat function, it is necessary to use the
Faber ITC-V2 App on Smartphone or Tablet.
The remote control registers the room
temperature and should therefore be used
appropriately place in the supplied holder. (See
Chapter 7).
Only have the fire installed by a qualified installer
according to the water and electric safety
regulations. Read this installation manual properly.
CE Declaration
The product complies with the European Safety
Standards EN60335-2-30 and the European
Standard Electromagnetic Compatibility (EMC)
EN55014, EN60555-2 and EN60555-3 these cover
the essential requirements of EEC Directives
2014/35/EU and 2014/30/EU.
Safety instructions
CAUTION, FAILURE TO NOT FOLLOW
THESE INSTRUCTIONS MAY CAUSE
DAMAGE AND VOID YOUR WARRANTY.
•
Use this heater in the country where it
was purchased from an authorized retailer
•
The appliance must be installed in
accordance with the latest applicable
regulations and may only be used in a
sufficiently ventilated room (see building
regulations)
•
The appliance must be checked annually
in accordance with these installation
instructions and the applicable national
and local regulations.
•
Check that the data on the rating plate
corresponds to the local electrical data
•
The appliance has been designed for
atmospheric and heating purposes. This
means that all visible surfaces, including
the glass, can become hotter than 100 ° C.
•
The settings and construction of the
fireplace must not be changed!
•
Do not use outdoors.
•
Do not use in the immediate vicinity of a
bath, shower or swimming pool. This
appliance must not be powered from an
external switching device, such as a timer,
or connected to a circuit that is regularly
turned on and off by the utility.
•
Do not cover the device to avoid
overheating. Do not place any material or
clothing on the device or obstruct the air
circulation around the device, for example
through curtains or furniture.
Installation requirements
This appliance must be connected to an earthed
socket. Do not use an extension cord or a multi-
plug adapter.
Cleaning and maintenance
The water sump in this product is treated with a
biocidal product, Silver Biocide in order to control
harmful or unwanted organisms. This conforms
with the latest relevant ISO standard.
The device must be cleaned and checked by a
qualified specialist to ensure the safe use and to
guarantee a long service life.
The outside of the fire can be cleaned with a clean
damp cloth.