FABER S.p.A. ZOOM, Instruction Manual, Page: 34 / 36

EN
3
34
Additional information for the installation technician
• Open the lighting unit by pulling on the notch provided.
• Apply the label, indicated the type of lighting, on the Hood as indicated in the figure
(Rif. A ).
A
B
Procedure to be used in case of malfunction on the movement
• Check that the fuse is properly inserted and that it has not burned out, for replacing the
fuse open the lighting unit and unscrew the fuser holder and replace it with one having
the same characteristics (Rif.
B)
• Check that the hood canopy is fitted level (the use of a spirit level is recommended).
• Check that the four cables are all at the same tension.
The front left cable must not be
slacker than the others .
If even these operations do not solve the problem contact the Technical Assistance.