PLAN YOUR DESIGNS HERE
USING THE STENCILS
Use the next page of your instructions to plan out your design.
However, do not put the stencils on the paper.
When you are ready to etch, peel stencils off the backer and then
position them on top of your accessory. Use the stencil to guide the outline of
your design. Then fill in the middle.
Carefully peel off the stencil when you are done.
Note – When using the tool, normal wear and tear of the stencils is expected.
In most cases, stencils are intended to be used one time.
You can also try using the stencil “middles” and etch
around them. Just place the inside of the stencil
on your accessory, and etch around the outside as shown.
ADDING COLOR
Once you have etched your designs, follow these
instructions to add colorful inserts or photos to
your backpack, clips, frames and room signs
Pro-tip: If adding a photo to your magnet frames
or backpack clips, look for images with darker
backgrounds for your etching to stand out more.
Save your Etch-It Workshop tool and any unused materials for future projects.
Ask your parent’s permission before etching any other materials.
Backpack Clips:
Remove the backs from the backpack clips. (Use the
notch on the back and lift with a paperclip). Trace around the frame back
on the paper insert or photo you are using. Cut it out and place it inside
your frame. Snap the back in place.
Pro-tip: For a sophisticated look, try etching both sides of
your backpack clip, and don’t put paper in between; but be
careful what you choose to do, as you will see both sides!
Magnetic Frames:
Bend the opposite corners to loosen and remove the
back. Use this as a guide to trace your image onto your paper or photo.
Insert the paper into the frame and replace the magnetic back.
Room Sign:
Use the room sign printed backer as shown. Thread the string
through the holes in the backer and room sign. Secure it with a knot.
Now it’s ready to hang.
USING THE LETTER & NUMBER GUIDES
To add words or initials, use the alphabets printed on the back page
of the instructions. Plan out your design first to make sure the words
and letters are centered and they all fit.
Remove the backs from the backpack clips and frames. Place your
backpack clips, frames or room sign over the letters - so they show
through - and carefully trace along the outline with your etching tool.
The lines underneath the letters are there as a guide to help keep
your letters straight if desired.
Reminder: Do not stick the stencils to the paper.
Remove plastic coating
before etching the room sign.