2/2
Avoid vibrations!!!
Do not cover the sensor!
Avoid moving objects in
proximity of the sensor!
Avoid HF lamps and
fluorescent lighting in
proximity of the sensor!
Do not remove the protection
which avoids contact with the
electronical parts!
Technology
: microwave and microprocessor
Transmitter frequency
: 24.175 GHz
Transmitter radiated power
: <20 dBm EIRP
Transmitter power density
: < 5 mW/cm²
Mounting height
: from 1.8 m to 3 m
Tilt angles
: 0° to 90° vertical and -30° to + 30° lateral
Detection area (mounting height = 2.2 m)
: 4m (W) x 2m (D)
Detection mode
: motion
Minimum speed
: 5 cm/s (measured in the sensor axis)
Supply voltage
: 12V to 24V DC +30% / -10%
Power consumption
: < 2W (VA)
Output (electronic relay)
Max. current
Max. voltage
: 250 mA
: 50 VDC/VAC
Temperature range
: -20°C to +55°C
Norm Conformity
: R&TTE 1999/5/EC; EMC 2004/108/EC
Degree of protection
: IP54
Material
: ABS & Polycarbonate
Color of head housing
: black smoked, aluminum
Dimensions
: 80 mm (W) x 60 mm (H) x 55 mm (D)
Weight
: 140g
Length of cable
: 2.5m
Specifications are subject to changes without prior notice
The declaration of conformity is available on our website: www.faac.it
SYMPTOMS
POSSIBLE CAUSES
CORRECTIVE ACTION
The door will not open and no red LED
lights up.
The sensor power is off.
Check the wiring and the power supply.
The door opens and closes constantly. 1. The sensor "sees" the door moving.
Increase the tilt angle and/or reduce the sensitivity.
2. Closing the door creates vibrations
picked up by the sensor.
Ensure that the sensor is correctly fixed.
The door will not close.
Red LED OFF
1. On-Off switch at door control is in
wrong position or faulty.
Make sure that On-Off switch for door is in the ON or
AUTOMATIC position.
2. Improper output configuration
Check the output configuration setting on each sensor
connected to the door operator.
42.0805 / V1 –
01.08
4 Troubleshooting
5 Technical
specifications
3 Installation
tips
FAAC S.p.A . - Via Benini, 1 40069 Zola Predosa - Italia - tel. +39 051 61724 - fax. +39 051 758518 - www.faacgroup.com
