XKP W
2
532110 - Rev.A
1. XKP W
The XKP W is included in the FAAC range of radio
control devices SLH. In order to operate cor-
rectly, all radio devices in a system must have the
same frequency, 868 MHz or 433 MHz (see the
FAAC catalogue) and in order to be recognised,
the channels of the devices must have the same
radio code as the receiver.
The XKP W allows the radio channels to be ac-
tivated by entering the numeric codes reserved
for each user. Each user code must be stored on
the device using a programming procedure. In
order to restrict access, user codes must not be
given to other people.
The XKP W has 4 radio channels (Ch1, Ch2,
Ch3, Ch4).
A direct radio channel can be programmed that
is not code protected, which can be activated
using button E.
!
The XKP W cannot be used as an emergency
stop device.
The XKP W cannot be used as a hold-to-run
control.
The XKP W is factory set to
Easy Operation
mode: each user code consists of 4 digits and
only ever activates one radio channel. Al-
ternatively,
Advanced operating
mode can be
set: each user code has a variable length from
2 to 6 digits and can activate one, several or all
the radio channels that are available. The user
must always specify which radio channel he
wishes to activate.
XKP W master/ XKP W slave
. The XKP W is factory
set to master, i.e. it can ‘teach’ its own radio codes
to another SLH radio device. The programming
function allows you to convert the XKP W into a
slave unit (i.e. it can ‘learn’ but not ‘teach’).
Programming
which is password (PWD) pro-
tected allows you to:
-
store user codes
-
delete the user codes individually or all of them
-
change the PWD
-
restore factory settings
-
enable/disable a direct radio channel using
button E
-
teach the radio codes to a SLH device or to learn
the radio codes from a SLH transmitter
-
set the XKP W to a slave unit (this operation is
irreversible)
-
randomise the radio codes
-
set the mode of operation to Easy or Advanced
(possible only if the user code memory is empty)
Operation
Easy
Advanced
Code length
4 digits
from 2 to 6
digits
Activatable
channels
only one Ch from 1 to 4 Ch
Direct radio
channel
available
available
TECHNICAL DATA
battery operated
CR2450 3 W No. 2
average battery life
(10 activations/day)
2 years
radio frequency
XKP W 433
XKP W 868
433.92 MHz
868.35 MHz
type of coding
SLH encrypted self-
learning rolling code
MAX power consumption 20 mA
protection rating
IP 54
operating temperature
-20°C to +55°C
dimensions
100 x 72 x 21 mm
user code memory
max 255 codes