![background image](http://html.mh-extra.com/html/faac/tm2-x-sw/tm2-x-sw_manual_535249020.webp)
TM2 X SW
20
A4518_6H80_Rev.A
WHERE TO PLACE THE WIND & SUN SENSOR
SETTING OF SEVERAL MOTORS TO ONE SENSOR
ATTENTION
!
The TM2 X SW sensor must be positioned to the side, as close as possible to its
awning, and not above or below the awning coverage area.
One single TM2 X SW sensor can be used to automate a group of motorised awnings.
For a correct function, the coupled awnings must be mounted and exposed to
sunlight and wind in the same way. Do not connect more then 5 motors to one
wind sensor.
RIGHT
RIGHT
RIGHT
WRONG
WRONG
WRONG
EN
Summary of Contents for TM2 X SW
Page 1: ...TM2 X SW ...