UM1
19333 0615 D/GB
Models
TM XT1 MINI
Technical Details
Frequency:
433.72 MHz
Modulation:
ASK
Coding:
T-MODE
Function:
UP/STOP/DOWN
Power supply:
1x 3-V-battery, CR2032
Operating
Temperature:
-20 °C to +60 °C
Range:
free-field: approx. 150 m
buildings: approx. 30 m
Dimensions:
37 x 61.5 x 10,7 mm
Weight:
30.0 g (incl. battery)
Scope of Delivery
Transmitter incl. battery CR2032,
Operating instructions
Intended Use
The transmitters may only be used to operate
T-MODE radio receivers.
The transmitters may only be used in dry environ-
ments!
The manufacturer shall not be liable for any dam-
age caused by improper or non-intended use!
Safety Advice
Before using the transmitter, carefully
read through the operating instructions!
Note also the operating instructions of the radio
control.
Never operate doors or other items of equip-
ment without keeping them under watch as you
do so. Persons could be placed in danger!
Keep the transmitter away from children!
Check at regular intervals that the transmitter is
ready to transmit!
Have faulty transmitters checked by the manu-
facturer!
Do not make any unauthorized alterations or
modifications to the transmitter!
Keep the batteries out of the reach of children!
Hand Transmitter TM XT1 MINI
GB
Function
The Hand Transmitter TM XT1 MINI is a radio
transmitters with 4-button operation. By press-
ing a button, the transmitter codes (UP/DOWN/
STOP) are tansmitted.
The transmitter has a battery check function,
which checks the capacity of the battery. If the
battery is weak, the LED flashes during trans
-
mission.
In the transmit telegram a under voltage bit is set.
This telegram can be evaluated by adapted recei-
vers. For information, read the operating instruc-
tions for the relevant receiver.
Start-Up
The transmitter comes with a battery already in-
stalled. Once it is unpacked, it is ready for imme-
diate use.
Transfer the transmitter codes to the radio recei-
ver. For this read the operating instructions sup-
plied with the radio controls.
Using the transmitter
Press the transmitter button. The LED lights up
and the coding are transferred to the receiver.
If the LED flashes after depressing the
trans-
mitter button, please change the battery.
Insert/change battery
1. Insert a small object (for example: slotted
screwdriver) into the slot on the back side of the
transmitter. Press the cover carefully upwards.
2. Replace the battery. Only use batteries of the
type CR2032.
Make sure the poling is correct. The
positive pole has to be visible!
Keep batteries out of reach of children!
3. Replace the cover back.
The coding of the transmiter is preserved
even if there is no voltage supply. You do not
need to memorize the code in the receivers
again after a battery change.
Trouble Shooting
- If the LED does not light up at all: exchange
the battery or make sure that the poling of the
battery is correct.
- If the LED flashes after the transmission proce
-
dure: exchange the battery.
- If the radio receiver doesn´t react: move closer
to the radio receiver or re-transfer the transmis-
sion code to the radio receiver.
Disposal
Waste electrical products and batteries not be
disposed of with household waste!
Dispose of the waste product via a col-
lection point for electronic scrap or via
your specialist dealer.
Dispose of used batteries in a recycling
bin for batteries or via the specialist trade.
Put the packaging material into the re-
cycling bins for cardboard, paper and
plastics.
Warranty
Within the statutory warranty period we undertake
to rectify free of charge by repair or replacement
any product defects arising from material or pro-
duction faults.
Any unauthorized tampering with, or modifica
-
tions to, the product shall render this warranty
null and void.
Conformity
This product conforms to the basic requirements
of the R&TTE Directive 1999/5/EC.
For use in: EU/CH/FL/IS/N
The Declaration of Conformity can be acquired
from the supplier referred to in the delivery docu-
ments.
Service
If, despite correct handling, faults or malfunctions
occur or if the product was damaged, please
contact your retailer or the manufacturer.
FAAC SPA
Via Calari, 10
40069 Zola Predosa (Bologna)
Italy
Phone: +39 051 61724
Fax:
+39 051 75818
Internet: www.faac.com
E-Mail: [email protected]
programming
button
P of
the radio
receiver
learning
button
PTx
battery
CR2032
UP
STOP (HOME)
STOP
(HOME)
DOWN
LED
