FAAC FAA-4300 Manual Download Page 31

Page: 31 / 32

Regulatory Compliance

FCC Id: 2ALPX-PE-4GA

(Multiple variation part numbers registered under this main part number)

Grantee: Advanced Electronic Solutions Global Ltd

This device complies with Part 15 of FCC rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

Output power listed is ERP below 1GHz for Part 22 and EIRP above 1GHz for Part 24. RF

exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used

for this transmitter must be installed to provide a separation distance of at least 20 cm from

all persons. End Users must be provided with transmitter operation conditions for satisfying

RF exposure compliance.

Summary of Contents for FAA-4300

































Search results

Summary of Contents for FAA-4300

Reviews:

Related manuals for FAA-4300

Brands by name

Popular brands

FAAC FAA-4300, Manual

Search results

Summary of Contents for FAA-4300

Reviews:

Related manuals for FAA-4300

Brands by name

Popular brands