12
200
200
30
30
30
37,5
80
ENGLISH
fig. 12
fig. 13
1.2A FITTING THE ELECTRONICS MODULE ROD
The mechanical stops are 2 for single leaf and to 4 and double
leaf . Insert the sliding guide on the profile fig 13-
and insert
sideways the mechanical stop fig 13-
.
Then secure it with the 2 Allen screws fig.13 and fig.14-
.
1.3A ASSEMBLING THE SLIDING GUIDE
Important
: the rod with tie-rods be fitted before securing
the support profile to the wall.
If the rod was not fitted, you can fit the small plates with the
relevant screws instead of it
Insert the rod with tie-rods sideways on the support profile
in order to fit the electronics module fig.12
Important
: The central and side mechanical stops must
be fitted sideways, after the sliding guide, as first element
of the A140 AIR door.
fig. 11
Summary of Contents for A140 AIR Series
