© 2015 Click&Go, Faaborg Rehab Technic ApS
Smedemestervej 9 |5600 Faaborg | Denmark | T: +45 710205553 | E: [email protected]| W: www.faaborg-rehab.dk
4/15
2.
General information
2.1
Components of your push propulsion
Excel Click & Go Professional II
1.
Control panel
2.
Push handles
3.
Throttle
4.
Height adjustment of the push handles
5.
Battery
6.
Fixation point for the wheelchair
7.
Drive wheels
8.
Front wheels
Your push propulsion is equipped with a number of components and parts. You should know
these before continue reading this user manual. The design and specifications may change
without further notice.
2.2
General explanation of your push propulsion
The Click & Go Professional II are push propulsions, which support the attendant in propelling
the wheelchair. The push propulsion can only be used by the attendant. When you want to
use the push propulsion, you must push the free wheel pedal down. You can see the free
wheel pedal in the middle on photo 1. When you push the free wheel pedal down, the drive
wheels will make contact with the floor. Now the push propulsion is ready to use to support
the propelling of the person in the wheelchair.
1
2
3
4
5
6
1
2
3
4
5
6
7
8
Photo 1
Summary of Contents for Click & Go Professional II
Page 1: ...User Manual Click Go ...
