F5 ARX-4000, Hardware Installation Manual, Page: 35 / 94

Cable Connectors and Pinouts
ARX®4000 Hardware Installation Guide 3 - 7
Console Connector and Pinouts
The serial console port requires a serial rollover cable (RJ-45 to RJ-45) that
is included with the Accessory Kit. This cable is sufficient for connecting to
a terminal server. Do not use Ethernet cables.
Figure 3.1 RJ-45 Male Connector
For a direct connection to the serial port on a management station (such as a
laptop), an RJ-45 to serial DB9 adapter is also included in the Accessory Kit
and shown in the following figure.
Figure 3.2 RJ-45 to Serial DB9 Adapter
The complete contents of the Accessory Kit, see Table 5.1, on page 5-5.