F5 8900 Platform Manual Download Page 49

Page: 49 / 64

Platform Specifications

General specifications for system features

This table lists general specifications for BIG-IP

system features for the 8900 platform.

Specification

Item

Load balancing of any TCP/IP operating system: 32-
and 64-bit Windows

operating systems; all UNIX

platforms; and Mac OS

Server/Node operating system compatibility

All TCP services, UDP, SIP, and SSL; nearly all
IP-based protocols

Internet/Intranet protocol support

DNS proxy, SMTP, SSH, SNMP, dynamic/static network
monitoring, scheduled batch job processing, system
status reports, and alarms event notification

Administrative environment support

Secure SSL browser-based interface, remote encrypted
logon and file transfer using SSH monitor, BIG-IP

Network management and monitoring

system network monitoring utilities and additional
contributed software; SNMP gets and traps; iControl
API using CORBA and SOAP/XML

ASP, VB, ActiveX, Java, VRML, CGI, Cool Talk, Net
Meeting, Real Audio, Real Video, Netshow, QuickTime,
PointCast, or any HTTP-encapsulated data

Dynamic content support

Watchdog timer, failsafe cable (primary and secondary)

Device redundancy

Support for hot swap of the SFP modules

SFP hot swap

Any IP-based web or application server

Web server application compatibility

RIP, OSPF, and BGP with optional ZebOS Advanced
Routing Modules

Routing protocols

Support for maximum Ethernet frame size of 1818 bytes
and MTU of 1800 bytes

Jumbo frames

Important: Specifications are subject to change without notification.

Platform hardware specifications

This table lists hardware specifications for the 8900 platform.

Summary of Contents for 8900

































































Search results

Summary of Contents for 8900

Reviews:

Related manuals for 8900

Brands by name

Popular brands

F5 8900, Platform Manual

Search results

Summary of Contents for 8900

Reviews:

Related manuals for 8900

Brands by name

Popular brands