FUNCTION INTRODUCTION
7. Headlight: ON/OFF on the left side of
the handlebar is a light switch.
8.Brakes and back light: The brakes
cannot be accelerated when the brakes
are not fully rebound. The night running
lights and the front lights are switched
synchronously. The brake lights are
bright when braking.
9. Electric and power-assisted: the
maximum design speed of electric is
25km/h (default value) (the load, road
conditions and power state are differ-
ent), hold the brake, turn the throttle
to the end and then turn on, you can
switch the maximum speed limit 20/25 h),
single gear boost.
10. Cruise at fixed speed: During
electric driving, turn the accelerator
to hold for 5~8 seconds and then
release, you can drive at a constant
speed at the current speed, turn the
accelerator or brake again to cancel the
cruise.
1.Install the handlebar after unpacking,
straighten and release the quick-release
handle, adjust the horizontal handle to
the appropriate direction, then press the
quick-release, gently hold the brake
lever a few times, and use it after the
brake line returns to the best state ,
then install the foot pedal.
2.Charging: Connect the charger and start
charging. When the indicator light of the
charger changes from red to yellow-green,
continue charging for one hour more.
3. Switch on: Pressing the power switch
directly to turn on.
4.Switch off：Pressing the power switch
directly to turn off, the dashboard
won’t work after switch off.
5.Power indicator: There are four levels
of power indicator on the meter, which
correspond to high power, medium power
and low power respectively.
6.Horn: Switch on the left side of the
handlebar. After pressing the horn
button, the horn starts to sound. It is
recommended to click. If you continue to
press the horn button, the horn will stop
automatically after 10 seconds. Please
release it before using it.
DC2.1
Charging port
Light switch
Dashboard
Horn
Full handle
Throttle
Power Switch
