INTRODUCTION TO METER
See below meter screen:
INTRODUCTION TO THE ICONS ON METER INTERFACE
Definition of
Display Icon
Front Light
Display Icon
Display
When the front light is turned on,this icon is always
luminous. When the front light is turned off, it will be
lightless. (The users can take this function for reference
when pressing the button on meter to turn on or turn off
light.Other operations to turn on or turn off light is subject
FUNCTION INTRODUCTION
1.Install the handlebar after unpacking, straighten and release the quick-release handle, adjust the horizontal handle
to the appropriate direction, then press the quick-release, gently hold the brake lever a few times, and use it after
the brake line returns to the best state , then install the foot pedal.
2.Charging: Connect the charger and start charging. When the indicator light of the charger changes from red to
yellow-green, continue charging for one hour more.
3.Switch on and off: Lightning " " button on the wireless key, press it twice in rapid succession, hear the alarm
sound once, then you can turn on, the instrument will start to work 3.after turning on; Unlock the“ ”key on the
wireless key, or lock the “ ” key, press once to hear the alarm sound twice, you can shut down, the meter stops
working after shutdown.
4.Turn on the anti-theft/release the anti-theft: Press the lock " " key on the wireless key to turn on the
anti-theft. In this state, when the car is shaken, an alarm will sound.
Press the unlock key " " to release the anti-theft. In this state, the car will not emit an alarm sound when it
is vibrated.
5.Bike search/sensitivity: Press the ringing " " key on the wireless key, and the anti-theft device will ring 5
times at intervals to facilitate car search. You can press other keys to stop the chirping. Long press ring.
Press the " " button for 5 seconds to adjust the vibration sensitivity, one ring for high sensitivity, two rings
for medium sensitivity, three rings for low sensitivity, continue to long press the ringer " "Key to switch
cyclically.
6.Power indicator: There are four levels of power indicator on the meter. For details, please refer to the instrument
function introduction.
7.Horn: Switch on the left side of the handlebar. After pressing the horn button, the horn starts to sound. It is
recommended to click. If you continue to press the horn button, the horn will stop automatically after 10 seconds.
Please release it before using it.
8.Headlight: ON/OFF on the left side of the handlebar is a light switch.
9.Brakes and tail lights: The brakes cannot be accelerated when the brakes are not fully rebound. The night running
lights and the front lights are switched synchronously. The brake lights are bright when braking.
10.Electric and power-assisted: The maximum speed of electric is 25km/h (the load, road conditions and power state are
different). The default ECO economical gear for power-on boot can be switched to three gears in a cycle. For details,
please refer to the instrument function introduction. Any gear can be directly driven by the accelerator.
11.Cruise at fixed speed: When driving electrically, rotate the accelerator for 5~8 seconds and release it. You can
drive at a constant speed at the current speed. Rotate the accelerator or brake again to cancel the cruise at fixed
speed.
12.Battery Removal and Installation: Press the lower handle behind the seat cushion, turn the seat cushion forward,
DC2.1
Charging Port
Light switch
Dashboard
Horn
Half handle
Throttle
