SERIES
9900
9000
SERIES
GAUSSMETERS
SECTION V continued
V
-
B
(
b
)
RANGE SELECTION
Remote (Slave) Mode Operation
1 = Channel 1
2 = Channel 2
3 = Channel 3
Command - RA<channel><range>
I
1 = 3 G or 300 µT ( 3 0 mG o r 3 µ T )
2.=30Gor 3 mT ( 3 0 0 mG or 3 0 J )
3 = 300 G or 30 mT ( 3 G o r 300 iff)
4 = 3 kG or 300 mT ( 3 0 G o r 3 mT)
5 = 30 kG or 3 T ( 3 0 0 G o r 3 0 mT)
6 = 300 kG or 30 T ( 3 kG o r 300 mT)
7 = 3 MG or 300 T
8 = AUTO GAUSS / AUTO TESLA
NOTE: The range units (GAUSS or TESLA) are determined by the MODE
SELECTION command. The ranges shown in parenthesis ( ) are used with
a 0.01X probe.
EXAMPLE: "RA35" programs CHANNEL 3 for 3 TESLA (assuming the
MODE is set for TESLA with a 1X or 10X probe).
V-B(c) PEAK HOLD
Command - PE<channel><state>
1 = Channel 1
2 = Channel 2
3 = Channel 3
1 = PEAK HOLD OFF
2 = PEAK HOLD ON
3 = PEAK HOLD RESET
EXAMPLE: "PE21" turns PEAK HOLD off for CHANNEL 2.
V-B(d) DISPLAY FORMAT
Command - Dl<channel><bargraph><digits><backlight›
H
1 = Channel 1
2 = Channel 2
3 = Channel 3
1 = BARGRAPH OFF
2 = BARGRAPH ON
1 = DIGITS OFF
2 = DIGITS ON
1 = BACKLIGHT OFF
2 = BACKLIGHT ON
EXAMPLE: "DI1222" enables the bargraph and the digital reading for
CHANNEL 1 and turns on the backlight.
28
