ATR833-II / P/N 833-II (Cxxx)-(Cxxx)
Operation and Installation
15
Doc.-No. 01.143.010.71e / Revision 1.01
To exit the frequency list, press DW or wait 10 seconds until time-out.
To every frequency entry a name can be assigned with up to 8
characters, which is shown right of the entry.
To assign a name to a memory entry,
the appropriate entry must be
selected. The next steps follow
directly step 4 from above.
5. Change of name entry:
A long press of the Cursor button
enables the entry of a name
ACT
118.275
SBY
123.450
E 07
6. Enter the name:
By
changing
the
selected
character
with
FREQ,
and
advancing the selection with
►
,
just as when manually entering a
standby frequency.
ACT
118.275
SBY
123.450
E 7
E D T
7.
Store the name:
The new entry is either stored with
a long press of MEM or by a short
press on the Cursor button .
ACT
118.275
SBY
123.450
E 7
E D T
To exit the frequency list press the SET button or wait 10 seconds until
time-out.
2.4.6 ATR Frequency Tool
The ATR Frequency Tool from Version 1.3 supports the ATR833-II. With
the tool the frequency memory of the ATR833-II can be managed, i.e.
frequencies can be added, edited and deleted. The frequency list can be
stored as a file.
The ATR Frequency Tool can be downloaded from the f.u.n.k.e.
AVIONICS homepage in the service area under Info / Download.
