F-SECURE POLICY MANAGER 7.0 -, Administrator'S Manual

Page: 222 / 241

APPENDIX C 222
FSII Remote Installation Error Codes
C.1 Overview
This appendix describes the most common error codes and messages
that can occur during the Autodiscover Windows Hosts operation.
C.2 Windows Error Codes
Error Code Description
1057 The user account name is invalid or does not exist.
5 Access Denied -- If using “This Account”, it is important that the
administrator is logged on to the F-Secure Policy Manager Console
machine with Domain Administrator privileges. With Domain Trusts,
make sure you have logged on to the F-Secure Policy Manager
Console using the account from the trusted domain.
1069 Logon Failure. In most cases, the entered password is wrong.
1722 RPC server is unavailable. This error message might appear if the host
was restarted immediately after installation and F-Secure Policy
Manager Console did not have time to verify that the installation was
successfully completed.
1219 F-Secure Policy Manager Console has open network connections to
target workstation. Close the connections before trying to open
connections with another user account.