F-SECURE ANTI-VIRUS LINUX CLIENT SECURITY -, Administrator'S Manual

Page: 34 / 208

32
4.1 Accessing the Web User Interface
In small deployments where F-Secure Policy Manager is not available,
the web user interface can be used to configure the product. You can
access the web user interface from the system tray, or with the
http://localhost:28080/
address.
If you allow the remote access to the web user interface, you can access
it with the following HTTPS address:
https://<host.domain>:28082/
.
It is possible to have in use both F-Secure Policy Manager and the web
user interface at the same time. Note that the user can locally override the
settings created with F-Secure Policy Manager unless the administrator
has prevented this by selecting the
Final checkbox in the F-Secure Policy
Manager settings.
4.2 Basics of Using F-Secure Policy Manager
If your corporate network utilizes F-Secure Policy Manager to configure
and manage F-Secure products, you can add the product to the existing
F-Secure Policy Manager environment. In the centralized administration
mode, F-Secure Policy Manager Console is used to change settings and
view statistics of the F-Secure products.
Use the variables under the F-Secure Anti-Virus Linux Server Security /
Settings branch or F-Secure Anti-Virus Linux Client Security / Settings to
define settings for the product. depending on the installed product.
For more information about F-Secure Policy Manager, see F-Secure
Policy Manager Administrator’s Guide.