F-SECURE ANTI-VIRUS LINUX CLIENT SECURITY -, Administrator'S Manual

Page: 78 / 208

76
2. Recalculate the baseline. The baseline update progress is displayed
during the process, and you are prompted to select whether to
include the new files in the baseline:
/opt/f-secure/fsav/bin/fsic --baseline
3. Enter a passphrase to create the signature.
Verifying the Baseline
Follow these instructions to verify the baseline from the command line:
1. Run the command:
/opt/f-secure/fsav/bin/fsic
2. Enter the passphrase that you used when you created the baseline.
3. The product validates files and displays whether the files are intact.
7.4.2 fsims
Use the following command to enable Software Installation Mode:
/opt/f-secure/fsav/bin/fsims on
After you have installed the new software, disable the Software
Installation Mode to restore the normal protection level:
/opt/f-secure/fsav/bin/fsims off
For more information about the Software Installation Mode, see “ Software
Installation Mode ” , 62 .
7.5 General Command Line Tools
You can use the
fssetlanguage
command line tool to set the language
used in the web user interface.
7.5.1 fssetlanguage
Use the following command to set the language:
/opt/f-secure/fsav/bin/fssetlanguage <language>