leaking.
2.2 Turn On / Off Video Light
2.2.1 Turn on: Clockwise unscrew the rear of the video tightly, press the button
on the light head, the light will be turned on (White is the default).
2.2.2 Turn off: Press the button on the light head for 2 seconds up, the light will
be turned off.
2.3 Mode Switching
Video Light includes 4 modes, press the light head button for 2 seconds
down, then white high beam; white mid beam; white low beam, red high beam
will be switched by turns.
2.4 Temperature Protection.
If inner temperature exceeds the setting value, inner control circuit will
decrease the brightness automatically,
to make sure the temperature within
the controlled scope.
Summary of Contents for LED 2000
Page 1: ......
