English | 11
www.ffgroup-tools.com
TMS 210 PLUS
KEEP GUARDS IN PLACE AND IN WORKING
ORDER
Never wedge or tie lower blade guard open. Check
operation of lower blade guard before each use.
Do not operate if lower blade guard does not close
briskly over saw blade.
OUTDOOR USE EXTENSION CORDS
When tool is used outdoors use only extension
cords intended for use outdoors and so marked.
KEEP BLADES CLEAN AND SHARP
Sharp blades minimize stalling and kickback.
KEEP HANDS AWAY FORM CUTTING AREA
Keep hands away from blades. Do not reach
underneath work while blade is rotating. Do not
attempt to remove cut material when blade is
moving.
WARNING
: Blades coast after turning off.
INSPECT TOOL CORDS PERIODICALLY
If damaged, have repaired by authorized service
centre. Stay constantly aware of cord location and
keep it well away from rotating blade.
USE RIP FENCE
Always use a fence or straight edge guide when
ripping.
BEFORE MAKING A CUT
Be sure the depth, bevel and miter adjustments
are tight.
USE CORRECT BLADES
Do not use blades with incorrect size holes. Never
use blade washers or bolts that are defective or
incorrect. The maximum blade capacity of your
saw is 254mm.
AVOID CUTTING NAILS
Inspect and remove all nails from timber before
cutting.
NEVER
Touch the blade or moving parts during use.
NEVER
Start the saw when the blade is in contact with the
work piece.
LASER LIGHT. LASER RADIATION
Do not stare into beam. Only turn laser beam on
when tool is on work piece.
PRODUCT SPECIFICATIONS
INTENDED USE
Cross cutting wood and plastic, cross cutting
miters, joints, etc., for picture frames, moldings,
door casings and fine joinery. Use aluminium blade
for aluminium cutting only.
NOTE
The crosscut blade provided is for most wood cutting
operations.
TECHNICAL DATA
Article number
46 042
Model
TMS 210 PLUS
Rated Voltage
V
220-240
Frequency
Hz
50/60
Input Power
W
1.450
No load speed
min
-1
5.000
Blade size
mm
210x1,8
Max cutting capacity 0° /90°
mm
60x120
Max cutting capacity 0° /45°
mm
34x120
Max cutting capacity 45° /90°
mm
60x85
Max cutting capacity 45° /45°
mm
34x85
Weight
kg
6,8
Sound emission values determined according
to EN 62841-1, ΕΝ 62841-3-9
Typically the A-weighted noise levels of the
product are:
Sound pressure level
dB(A)
70
Sound power level
dB(A)
80
Uncertainty K
dB
3
Vibration total values ah (triax vector sum)
and uncertainty K determined according to EN
62841-1, ΕΝ 62841-3-9
Vibration level max:
a
h
m/s²
2,5
K
m/s²
1,5
IDENTIFICATION (FIG. 1)
1.
ON/OFF switch
2. Laser switch
3. Blade guard
4. Safety switch
5. Carrying handle
6. Miter table
7.
Release knob
8. Miter lock
9. Dust bag
10. Trenching depth adjustment screw
11. Fence
12. Mitre scale
13. Table insert (kerf plate)
14. Clamp assembly lock
15.
Upper fixed blade guard
16. Bevel lock
17. Side support bar location holes (2 sets)
18. Side support bar locking screws (x2)
19. Side support bars (x2)
OPERATION
WARNING
Before starting any cutting operations, bolt your com-
pound mitre saw to a workbench. Never operate your
mitre saw on the floor or in a crouched position. Fail
-
ure to heed this warning can result in serious personal
injury.
Summary of Contents for TMS 210 PLUS
