F.F. Group CSC 3.6V EASY, Instructions Manual

Page: 6 / 72

| English 6 CSC 3.6V EASY
English
GENERAL POWER TOOL SAFETY
WARNINGS
Read all safety warnings and all instruc -
tions. Failure to follow the warnings and
instructions may result in electric shock, fire
and/or serious injury. Save all warnings and
instructions for future reference. The term
“power tool” in the warnings refers to your
mains-operated (corded) power tool or bat-
tery-operated (cordless) power tool.
WORK AREA
f Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
f Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the
dust or fumes.
f
Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
ELECTRICAL SAFETY
f Power tool plugs must match the outlet.
Never modify the plug in any way. Do not
use any adapter plugs with earthed (ground-
ed) power tools. Unmodified plugs and
matching outlets will reduce risk of electric
shock.
f Avoid body contact with earthed or ground-
ed surfaces, such as pipes, radiators, ranges
and refrigerators. There is an increased risk
of electric shock if your body is earthed or
grounded.
f
Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
f Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the pow-
er tool. Keep cord away from heat, oil, sharp
edges and moving parts. Damaged or entan-
gled cords increase the risk of electric shock.
f When operating a power tool outdoors, use
an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduc -
es the risk of electric shock.
f If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD re -
duces the risk of electric shock.
PERSONAL SAFETY
f Stay alert, watch what you are doing and
use common sense when operating a power
tool. Do not use a power tool while you are
tired or under the influence of drugs, alco -
hol or medication. A moment of inattention
while operating power tools may result in
serious personal injury.
f Use personal protective equipment. Always
wear eye protection. Protective equipment
such as dust mask, non-skid safety shoes,
hard hat, or hearing protection used for
appropriate conditions will reduce personal
injuries.
f Prevent unintentional starting. Ensure the
switch is in the off-position before connect -
ing to power source and/or battery pack,
picking up or carrying the tool. Carrying
power tools with your finger on the switch
or energizing power tools that have the
switch on invites accidents.
f Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key
left attached to a rotating part of the power
tool may result in personal injury.
f Do not overreach. Keep proper footing and
balance at all times. This enables better
control of the power tool in unexpected
situations.
f Dress properly. Do not wear loose clothing
or jewelery. Keep your hair, clothing and
gloves away from moving parts. Loose
clothes, jewelery or long hair can be caught
in moving parts.
f If devices are provided for the connection of
dust extraction and collection facilities, en-
sure these are connected and properly used.
Use of dust collection can reduce dust-relat -
ed hazards.
POWER TOOL USE AND CARE
f Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer
at the rate for which it was designed.
f Do not use the power tool if the switch does