| English
12
f
Without original spare parts.
With unauthorized modifications.
According to the applicable product liability laws,
the manufacturer of the device does not assume
liability for damages to the product or damages
caused by the product that occurs due to:
f
Improper handling no complied with the operat
-
ing
instructions.
f
Repairs by third parties and not by authorized ser
-
vice technicians.
f
Installation of non-original spare parts.
f
Non-intended use.
f
Electrical system breakdown due to power of the
equipment in a manner not compliant with the
electric and VDE regulations.
f
Electrical system breakdown due to use of battery
or charger not approved by the manufacturer.
TECHNICAL DATA
Article Number
46 512
Model
CRS-BL 20V PLUS
Rated voltage (DC)
V
20
No load speed
min
-1
0 - 3.100
Blade stroke length
mm
28
Net weight (without battery)
kg
2,7
Max. cutting capacity
Plastic
mm
100
Wood
mm
120
Metal
mm
10
Sound emission values
Typically the A-weighted noise levels of the prod
-
uct are:
Sound pressure level (LpA)
dB(A)
79
Sound power level (LwA)
dB(A)
90
Uncertainty (K)
dB
3
Vibration total values a
h
(triax vector sum)
and uncertainty K
Vibration level max:
Vibration level (a
h,HD
)
m/s²
8,2
Uncertainty (K)
m/s²
1,5
IDENTIFICATION (FIG. 1, 2)
1. Blade clamp sleeve
2.
Operation switch
3.
Safety switch
4.
Handle grip
5.
Battery indicators
6. Battery (not included)
7.
Battery release knob
8. Operation type lever
9. Saw shoe adjusting lever
10.
LED light
11.
Cutting shoe
12.
Blade
13. Wood cutting saw blade
14.
Steel cutting saw blade
OPERATION
PREPARING THE UNIT
Unpacking and completing the assembly should
be done on a flat and stable surface, with enough
space for moving the machine and its packaging,
always making use of suitable equipment.
Battery
WARNING
Always switch off the tool before installing or remo
-
ving the battery.
WARNING
Hold the machine and the battery firmly when in
-
stalling or removing the battery. Make sure that the
battery is secured in place and do not force it.
To install the battery (Fig. 3.2), align the upper gui
-
de part of the battery with the grooves on the ma
-
chine’s battery housing. Slide the battery all the
way in, until it secures in position emitting a “click”
sound. To remove the battery, press the battery
release knob (Fig. 3.1) and holding it in position sli
-
de the battery out of its housing on the machine.
NOTE
The battery is equipped with an overload/overheat
protection system that cuts off power to the ma
-
chine in case it is operated in a manner that causes
it to draw an abnormally high current and/or rise in
battery temperature. In case the protection system
is engaged, stop the application that has caused this
and turn off the machine immediately. Let the bat
-
tery cool before trying to use the machine again. If
the machine still does not start, visit an authorized
service station.
Cutting blade
WARNING
Always use protective gloves when handling the cut
-
ting blade (Fig. 4.1) and make sure that you have dis
-
connected the machine from its power source.
To install the blade:
1. Unplug the machine from its power source.
2. Rotate the blade clamp anticlockwise (Fig. 4.2)
to blade release position and hold it in place.
3.
Insert the blade in position into the blade
clamp sleeve as far as possible.
4. Release the blade clamp and it will return in ne
-
utral position, locking the blade in place.
5.
Make sure that the blade is secured and it can-
not be extracted.
To remove the blade:
1. Unplug the machine from its power source.
2. Rotate the blade clamp anticlockwise to blade
release position and hold it in place.
3. Remove the blade (Fig. 5).
4. Release the blade clamp and it will return in ne
-
utral position.
CRS-BL 20V PLUS
