F+D Feinwerk- und Drucktechnik Plus, Software Manual, Page: 39 / 41

Software Manual
Plus
39
Appendix
F+D
Feinwerk- und Drucktechnik GmbH
Kirchenstraße 38, 69239 Neckarsteinach, Germany
Phone: +49 (0) 6229 7000, fax: +49 (0) 6229 70067
E-Mail: info@fuddruck.de, internet: http://www.fuddruck.de
2.2 Appendix B: Commands
2.2.1 Control sequences
Control block = {Control sequence 1 [Control sequence n]} n=[2...]
Control sequence = {< ESC >x.... < CR >} x=[a|b|...|z]
Control sequence Function Page
< ESC > b d.. [; d.. ] < CR > Image height 7
< ESC > c d.. < CR > Image width 7
< ESC > j d.. < CR > Printing speed 6
< ESC > k d.. [;0|;1] < CR > Printer data (reset|set) 7
1: printout via print button
20: use transfer printing
40: Card feeder available
100: automatic card feeding
< ESC > l a
Obj
; d..
Width
; d..
Height
; Data < CR > Variable object (logo) 8
< ESC > n d.. < CR > Country code 8
< ESC > t d.. < CR > Card feeding / Card output 9
< ESC > u d..
Offset
;d..
Length
;a
Action
; [ HH
Data
] < CR > Transponder data 9
< ESC > v a
Obj
; Data < CR > Variable object (Text, Barcode)
Fehler! Textmarke nicht definiert.
< ESC > w [+/-] d.. < CR > Thermal print head heating time 10
< ESC > # d.. < CR > Print job and number of cards 7
# d.. + Print without Start-/Stop-ramp
Note: Examples:
a = 1 ASCII-character <ESC>Va
d.. = Decimal number <ESC>G120
s = String (max. 8-digits) <ESC>Tarial18f;Text line