Tuning Guide for the 2000 Ezzy Duo and Duo Plus
EZZY DUO 2000
SAIL TUNING
Rigging:
1) Slide the mast through the luff sleeve.
Note: slide
the mast above the cams (do not attach the cams to the
mast yet).
slide the mast above the cams.
2) Attach the mast extension
and thread the line through
the cleat. Do not tension the downhaul yet, just cleat the
line off.
3) Attach the front of the boom to the mast and
outhaul the sail
to
the boom length that is printed on
the sail.
The suggested boom length is measured from
the clew to the front of the mast at the center of the boom
cutout.
4) Attach the cams to the mast
by pushing down on the
batten with the palm of your hand, approximately 12" (30
cm) from the luff sleeve, and snap the cam onto the mast
with your other hand.
If the cam is difficult to put onto the mast,
check that the batten tension webbing is
loosened until the
Velcro
™ touches the
Page 1