Ezytrail Parkes 13 Owner'S Handbook Manual Download

Page: 28 / 40

MAINTENANCE

Maintenance is essential to keep your caravan in a safe and usable condition. Caravans are no different to

any other motor vehicle and require servicing at regular intervals which may vary according to use and the

environment in which it is used. The service schedule outlines the service intervals for safe travelling and your

owner obligations under our warranty policy. Servicing should always be carried out by a competent person

with relevant experience.

WARNING:
• NEVER WORK BENEATH THE CARAVAN WHILE SUSPENDED ON A JACK.

ALWAYS USE “JACK STANDS” WITH AN ADEQUATE SWL (SAFE WORKING LOAD).
• ALWAYS USE DEDICATED JACKING POINTS
• 240V APPLIANCES AND WIRING MUST ONLY BE SERVICED AND REPAIRED

BY A QUALIFIED TRADESPERSON.
• GAS PLUMBING MUST ONLY BE SERVICED AND REPAIRED BY A QUALIFIED GAS FITTER

PARKES SERIES

Summary of Contents for Parkes 13









































Search results

Summary of Contents for Parkes 13

Reviews:

Related manuals for Parkes 13

Brands by name

Popular brands

Ezytrail Parkes 13, Owner'S Handbook Manual

Search results

Summary of Contents for Parkes 13

Reviews:

Related manuals for Parkes 13

Brands by name

Popular brands