page 3 of 6
SET-UP INSTRUCTIONS
IMPORTANT: DO NOT USE EXCESSIVE FORCE DURING ANY PART
OF SET-UP
Stand frame upright.Starting at the
corners, with partner standing on the
opposite side, grasp the two outer
legs, slightly lift the frame off the
ground and step backward, stopping
at full arms’ length.
Place the fabric canopy over the top
frame. Use the Velcro pads to secure
each corner of the canopy to the
frame under the plastic leg caps.
Each partner should then grasp the
bottom of the middle frame section
(cross beams)where it forms diamond.
Lift slightly and slowly walk backward
until the frame is fully extended. Be
careful not to pinch your finger and
not pull backward too hard as this
may result in the bending of cross
beams.
1
.
2.
3.
Tips:
the frame need to be expand to the
maximum. you may walk inside the canopy
and push up the frame. In case heavy, you
may fully open and lock the frame first and
put on the canopy top after.