www.tristatesurgical.com 800-899-8741
EZY302 Pulse Oximeter
QUICK OPERATOR’S GUIDE
Ⅰ
Ⅰ
Ⅰ
Ⅰ
Product Information
The EZY302 pulse oximeter is intended for the measurement of pulse oxygen saturation of arterial
hemoglobin (SpO2) and pulse rate. This oximeter can be used for adult, pediatric
，
and neonatal patients.
Ⅱ
Ⅱ
Ⅱ
Ⅱ
Installation and Use
1. Battery Installation
Pull back the battery access cover, put in four
“
NiMH AA
”
size batteries in the right direction, and then
put back the battery access cover (See Figure 1).
Figure 1: Battery Installation Figure 2: Sensor Installation
NOTICE: Always fully charge your batteries before use. When you charge the batteries for the first time,
or if the batteries have been stored for a long time, it normally takes about 3 charge and
discharge cycles for the batteries to regain full capacity.
2. Sensor Installation
Plug the finger probe connector in the oximeter sensor port and attach the finger probe to the patient
(See Figure 2).
WARNING: Before use, Please carefully read the User Operation/Technical Manual for the
EZY302 pulse oximeter.
