background image

 
7 - Operation instructions 

 

1.

 

Plug into 240v power outlet. Stand on the plastic side boards beside the running belt with hands holding the 
handlebars.  Insert  the  Safety  Key  into  the  Safety  Key  socket  on  the  Control  Panel  then  press  the  Start 
button. The treadmill will start running at about 1.0 km/h. 

Never start the machine while standing on the 

belt. 

2.

 

Use Speed Up & Down buttons to adjust the running speed. Use the Incline Up & Down buttons to adjust 
the  inclination.  Use  the  Numeric  Keypad  to  choose  speed  directly  when  running  (for  example  when  you 
press the button ”9”, the treadmill will automatically run at 9km/h.) NOTE: If you press the button “0”, the 
treadmill will stop immediately.   

3.

 

Operation instructions for 4 Preset systems: 
When the Treadmill is stationery press the Mode button and the Calorie display will indicate P0-P4. P0 is 
used for manual control of the treadmill. P1-P4 operates the preset programmes. Then press On/Off button 
to set the preset, every programme is 15 minutes duration, and every minute changes speed and incline. 
The largest incline is 15 degrees. 
 

 
 

4.

 

Operation instructions for presetting speed, time & distance: 
When in P0, press Reset button, the Control Panel instrument window will show “0”. By pressing Speed, 
Time or Distance each display window flashes separately. Set the value for each parameter by pressing “0-
9”  numeric  key.  Press  Clear  to  clear  any  previous  settings.  Press  the  Start  button  &  the  treadmill  will 
automatically speed up to the newly set value. The highest speed is 12km/h. The time & distance count 
down to finish, warn when near end, then stop. 

5.

 

When finished, press the Stop button or “0” numeric key. The 
treadmill  will  stop  immediately  &  the  inclination  automatically 
resets.  If  the  treadmill  isn’t  used  for  two  minutes,  the  Control 
Panel  automatically  turns  off,  with  the  touch  of  any  button 
reactivating the Control Panel. 

6.

 

Pulse Sensor testing: press the On button of the Pulse meter, 
rub  hands  together  several  times  and  hold  the  sensor.  The 
Pulse  meter  begins  to  display  present  value.  It  will 
automatically turn off within five minutes. 

This is not a medical 

device, and as such indicates an estimate only

7.

 

Pull up the treadmill to foldaway, and let go after the Securing 
Latch locks. 

8.

 

To  unfold  the  treadmill,  you  should  rotate  the  Securing  Latch 
down, then pull down the treadmill. (see picture at right) 

9.

 

Keep the Safety key attached to yourself when running. If you 
feel uncomfortable, pull the safety key from the Control Panel & 
the treadmill will stop at once. 

Time min  1 

10 

11 

12 

13 

14 

15 

P1 - km/h 

10 

10 

10 

10 

10 

P2 - km/h 

P3 - km/h 

P4 - km/h 

12 

12 

Summary of Contents for FIT 150












Reviews: