background image

1 - Safety

Attention: Carefully read this manual before using the machine.

·The treadmill is for indoor use only. Keep it free from moisture and splashes of water. Don’t put anything 
onto the machine.

·Keep the machine away from combustibles and flammables.

·Make sure that the four feet of the treadmill are firmly on the ground. If necessary, level the machine with 
pieces of carpet or rubber.

·Voltage should be within a range of 220-240 volts.

·The plug must be well grounded, and the power outlet must be capable of enduring electric currents more 
than 12 amperes. Avoid using other electrical appliances on the same power outlet line.

·Choose suitable sportswear and sports shoes for exercise. Never walk barefoot on the treadmill.

·Only one person (weighing up to 100kg’s) at a time, may use the treadmill.

·Stand on the plastic side boards beside the running belt with hands holding the handlebars, then start the 
machine. Never start the machine while standing on the belt.

·Adjust the running speed according to individual needs.

·A frail person or someone suffering from heart disease should not use the treadmill without medical 
supervision.

· Continuous exercise time should not last longer than 60 minutes. Pull the plug from wall when not in use 
so as to avoid accidents.

· This treadmill is for domestic use only. Overuse may; damage the motor/controller, speed up aging of 
bearings and running belt/platform.

·Keep it in a clean environment. Dust can lower the sensitivity of the speed sensor. 

·Maintain air humidity indoors in winter to avoid static electricity. Static may influence/damage the working 
of the electronics.

·The Treadmill Electronics should only be maintained by a qualified technician. 

Summary of Contents for Fit 100












Reviews: