Ezviz Mini Trooper, Quick Start Manual

Page: 14 / 17

9
Connect Base Station to Internet via Wi-Fi
(Optional network setup)
Step 1 Note Serial Number and Verification Code
- Write down the serial number and verification code located
on the base station.
Step 2 Connect to the base station Wi-Fi.
Using your mobile device or PC, look for and connect to the
Wi-Fi Network named “ezviz_xxxxxx” (xxxxxx represents the
six number/letter combination after “ezviz_”)
- Once you choose the “ezviz_xxxxxx” or “ezviz_xxxxxx_5G”
network, enter the Wi-Fi password which is the last four
digits of the Serial the Verification Code, (listed
on the device and package label).
To setup Base station Wi-Fi connection go to the web
browser in your mobile device or PC and enter the IP
address 192.168.7.1
Step 3 Wireless Relay Gateway Setup (connecting the base
station to your local Wi-Fi network):
- In your mobile device press the “Start Button.”
- Open antenna on the base station. Once that is complete,
click the “Antenna adjusted” button.
- Create a new Base Station login password. Note: Write this
new password down in a safe place for future reference.
- Choose your preferred Time Zone and select Daylight
Savings Time (DST) On or Off.