7
2� Insert the Key into the Lock
The lock is supposed to enable keyless door opening. For lock to be compatible with the key, the following
conditions must apply:
- The key must not be thicker than 4 mm.
- The length of the key head including the neck must be less than 37 mm for lock to be compatible (The key
head is the part of the key which people opening the door grasps. The following part of the key head up to the
reliefs is called the neck).
-
If a plastic cap is attached to the key, making the key thicker than 4 mm overall, it must be removed. This cap
increases the thickness of the key, making the bow no longer fit into the lock.
＜
37mm
The shape of the key head does not matter at all. It may be round, angular or oval.
Insert your key to the keyhole as showed below (take Mounting Plate A for example):
