
22
•
Install correct batteries in case of explosion.
• When not using batteries for a long time, remove them from battery slot.
•
Do not use new batteries with old ones at the same time.
•
Do not place batteries with the (+) and (-) in the wrong way around.
• Dispose used batteries according to the local environmental protection law.
Restore to Factory Settings
Remove the batteries, press and hold the Matching Key and install the batteries back. Hold the Matching Key for
5s until the LED indicator ring is solid orange, all parameters will be restored to factory settings.
Alarms of the Lock
You can dismiss alarm on EZVIZ App.
1. System Locked Alarm
Verify with wrong password or card 5 times in 5 minutes, the system will be locked for 3 minutes.
2. Low Voltage Alarm
Once battery voltage is lower than 18%, the voice prompt will remind you to replace batteries.
Alarms of the Keypad
You can dismiss alarm on EZVIZ App.
1. Anti-Tamper Alarm
Once being dismantled by force, the lock will send out alarm lasting about one minute.
2. System Locked Alarm
Verify with wrong password or card 5 times in 5 minutes, the system will be locked for 3 minutes.
3. Low Voltage Alarm
Once battery voltage is lower than 18%, the voice prompt will remind you to replace batteries.
Remote Unlock
Add your EZVIZ camera (sold seperately) to your EZVIZ App and relate it to the lock, you can unlock your door
remotely.
Temporary Unlock-keeping
Press and hold the Matching Key of the lock for 3s, when the LED turning flashing blue indicates that the lock is in
unlock state. You can set the temporary unlocking duration on the EZVIZ app.
This function is valid for one time.