4
Wall Mount
1. (For cement wall only) Drill screw holes on a clean and flat surface.
2. Fix the mounting braket on the wall with screws.
3. Mount the device on the mounting braket with screws(the screw holes on the mounting braket are corresponded to the four
holes on back of the device).
For First Use
For first time use, please connect the smart screen to the power and power on it, and then operate by following the interface
startup guidance.
1. After connect the power adapter with power cord, connect the smart screen with power adapter and plug the power adapter
into an electrical outlet.
Outlet
2. Power the smart screen on, complete the password settings according to the interface guidance.
3. Complete the network configuration and device access according to the interface guidance. It is recommended using
the smart screen with EZVIZ router, connect the accessed device and the smart screen into the same Wi-Fi. Routers can be
connected to the accessed device and smart screen with wireless connection or wired connection.
· Up to 8 devices can be accessed to the smart screen,
· The device back cover is overheating. If you touch this surface, you may cause personal injury.
