BEFORE BEGINNING,SEE THE ASSEMBLY INSTRUCTION VIDEO ON
EZTRUNK.NET
Alumium EZ Table for Tire
Ver A_8/04/22
CUSTOMER SERVICE: [email protected]
Text & Call : 203-901-0055 / Call 203-591-9060
Page
3
Diagram (3) Place table over tire. Hold table in place with pressure and hand pull
the support bar towards you to make a secure tight fit. Then tighten the thumb bolt
on each side of table.
3
Diagram (5) Loosen the thumb turn bolt on center leg and adjust accordingly to the
correct height. Tighten bolt to secure. Test stability & positioning by pushing down
on all four corners. Table should not move and be secure.
5
Diagram (4) Take hook side of webbing and feed through Hole #1 & #2 hooking
onto Hole #3. Then adjust webbing tight with fasten to secure tightly to the vehicle
tire.
4
Pull the bottom of buckle to release the hook. Follow opposite steps to remove the
EZ table from tire.
6
Hole #3
#2
#1
WE CAN HELP YOU!
Customer Service
Any question? WE ARE HERE TO HELP!
EMAIL US: [email protected]
Text or Call
203-901-0055 / Call 203-591-9060
7 days a week 8:30 am EST
