EZTalks Meet Pro Quick User Manual Download Page 2

www.ezTalks.com

V1.0

Meet Pro

Premium All-in-One Video Conferencing Device 

for Small Rooms

Quick User Guide

Specification

5. Enjoy a Seamless Communication

Use your PC or mobile device or ezTalks T-Voice 100 as a controller via 

ezTalks app. Sign into your ezTalks account (if you don’t have one, sign 

up first) on your controller.

Then you can experience a seamless communication with Meet Pro, 

which includes audio/video meeting, webinar or IM chat, with multiple 

productive features of screen sharing, interactive whiteboard, recording, 

etc. 

Video

Decode: 1080P@30fps, 720P@30fps; Encode: 1080P@30fps, 
720P@30fps, 640*360@30fps, 352*288@30fps, 320*240@
30fps; Video Processing: Hardware Encoding, 
Hadrware Decoding and Software Decoding; High bit rate 
compression, low bandwidth transmission, low illumination 
noisereduction; Format: H.264/H.265/HEVC 

Audio

Arrays: 4 mic arrays; Pick-up range: 5 meters; 
Encode: AAC(48K), G722.1; Technology: AGC, AEC; 

Camera

ISP: internal; Resolution: 1080p/720p/ 640*360/352*288/
320*240; Video Format: MP4; Encode: H.265/H.264(optional)

Network

Wifi: 802.1 b/g/n/ac (dual band); Ethernet: RJ45*1, 10/100/
100Mbps(adaptive)

Bandwidth

IP:64 Kbps~8 Mbps

Interface

Video Output: HDMI 2.0*1; USB: USB 3.0*2; 
TF Card: TF Card*1; Power: Power port*1; 
Reset: Reset port*1; Screw: Standard screw 

Environment

Temperature: 0°C ~40°C (On Working ) -10°C~85°C (Off Working); 
Humidity: 10%~80% (On Working ) 0%~95% (Off Working)

Warranty

1-month return or change for free;  
1 year for product maintenance

www.ezTalks.com

V1.0

www.ezTalks.com

V1.0

3) Set Wi-Fi
(If you have connected the Ethernet, please ignore this  step)

Method 1:
Download ezTalks app and generate a QR code to scan to connect to the 
network.

Method 2: 
Connect your mouse to Meet Pro,  click on “Set Network”, select your 
Wi-Fi and input your password with the virtual keyboard.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) 
this device may not cause harmful interference, and 2) this device must accept any interference received, 
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against 
harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful interference to radio communications. However, there 
is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful 
interference to radio or television reception, which can be determined by turning the equipment off and on, 
the user is encouraged to try to correct the interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the 
user’s authority to operate the equipment.

Radiation Exposure Statement
This device complies with RF radiation exposure limits set forth for an uncontrolled environment. This 
transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This device must operate with a minimum distance of 20 cm between the radiator and user body.

FCC Statement

Reviews: