USING THE CHRO AND DATA MODES
7
Read this section carefully before your first run!
th
Your watch has a 100 hour chronograph with 1/100 second resolution for the first hour
and 1 second resolution after 1 hour.
Press the MODE button until you get to CHRO mode.
Press the ST/STP button to start the chronograph.
While the chronograph is running, press the RESET button to record a lap. The recorded
lap number and lap time will be displayed for 5 seconds. Split time will then be displayed for
5 seconds, followed by your current “counting” lap time.(the “split time” is your total run time
at the point each lap is recorded)
You can record up to 10 laps.
Your current run is automatically updated and saved in DATA mode every time you record
a lap.
Press the ST/STP button to pause the chronograph.(your current lap time will be displayed)
To reset the chronograph press and hold the RESET button while the chronograph is
stopped (NOTE: this will also automatically clear DATA mode).
While the chronograph is running, the icon is blinking in Time mode.
Summary of Contents for L008
Page 1: ...Running Watch Quick Start Guide ...
Page 20: ...M008B 2 ...
