4. Open the cover of the HEPA filter
7. Clean the dust container with a
cloth or brush. Do not put it in the
water.
5. Remove the pre-filter and
the robot’s HEPA filter.
9. Replace the pre-filter and the HEPA filter in the dust
container
Notes:
- Before installing the filters, make sure that the HEPA filter
and the pre-filter are completely dry.
- Do not expose the filters to the sun.
10. Close the dust bin cover and install the dust bin in
the robot.
Please note: the dust container and the HEPA filter must
not be washed with water.
6. Gently clean the HEPA filter and
the pre-filter with water.
8. Let the various elements
dry before reinserting
them.
To clean the main brush, follow the instructions below :
1. Open the passenger compartment
the main brush
2. Remove the main brush
3. Use the cleaning brush to remove dirt.
To clean the side brushes, run them under water or clean them with a cloth
EN
Summary of Contents for Aqua Xpert 3.0
Page 1: ...eziclean Aqua Xpert 3 0 Manuel utilisateur User manual...
Page 2: ......
