EZiCaddy EZi-3, User Manual

Page: 4 / 12

Page 4
Initial Assembly
When you first receive your trolley, you will need to attach the front wheel
assembly. Push the plastic plug of the front wheel assembly into the main spar.
Take care to have the bag support plate facing upwards. Then use the spanner
provided and a pozi-drive screwdriver to secure the front wheel assembly to the
main spar using the two nuts and bolts provided. Fully tighten to prevent
movement. Please note the sequence of washers and spacers.
Folding and unfolding your trolley
To unfold the upper section of your trolley, depress the release lever 10 and pull
the handle away from the main spar. Continue unfolding until the upper spar
clicks into place. To unfold the bottom bag-stay section, depress the release lever
5 and pull the wheel away from the main spar. Continue unfolding until the
bottom bag-stay clicks into place.
To fold your trolley, make sure you have removed your battery. Then depress
lever 15 to release the upper handle section and continue folding until it clicks
closed. Then depress lever 5 to release the front wheel and continue folding until
it clicks into place.
The folded trolley is designed to be stable standing upright or flat on its back.
Never put your trolley into your car boot with the battery plugged in. It could get
switched on.